CJU-830 + CJ-570 + CJC-470

Eye Drop Production Line

main pic cju830 cj570 cjc470
Cju 830 Cj 500

Eye drops production processors design compliances with cGMP/Pic/s of the sterile liquid product guideline. In order to meet this standard, the entire processors are built without any pneumatic accessories to prevent particles polluting production area.

All parameters related with the finished products stability is computerized such as filling volume, capping torque and etc. By applying level authorized program design to set up operators access control system limitation and prevent inappropriate machine operation or unacceptable parameter modification.

All stainless steel parts contact with product raw material are made by SUS316L and all sterilized parts are capable to be 121℃ autoclave sterilized.

Unscrambler Rotating System:
  1. Containers are sorted and delivered by the stainless steel rotating disc.
  2. Rotating system is capable to connect with a dust collector to meet customer requirement
Unscrambler container guiding device:
  1. Containers are arranged by the special designed guiding device to correct orientation and delivered to the out-feed conveyor.
Inverted bottle rejected design:
  1. The special fence is designed for inverted defective bottles to reject to the rejection area.
Filling System:
  1. All contact with liquid material parts can be executed 121℃ sterilization procedure over 40 minutes.
  2. Control system adopts HMI and servo motors which not only allow user to easily set the required filling volume, filling system position and production speed but also meet the current pharm
  3. Piston type filling cylinder is made of Stainless steel with chrome coated to increase friction durability and decrease contamination.
  4. Solderless designed Filling cylinder prevents liquid cross contamination.
  5. Tool-less designed parts make the cleaning and sterilizing procedures much easier and more convenient.
Plugging System:
  1. Plugging system adopts vacuum pick and place system to meet cGMP Pic/s pharmaceutical guidelines.
  2. The plug detecting system confirms the plugging procedure completeness to prevent missing plug defective products.
  3. Control system adopts HMI and servo motors which allow user can easily set the plug vibrating device frequency, swing arm movement procedure and vibrator height to reduce the machine chang
Pre-Capping System:
  1. The pre-capping system adopts vacuum pick and place system to meet cGMP Pic/s pharmaceutical guidelines.
  2. The major purposes are preventing over-capping to pollute production zone environment and preventing missing caps defective products before entering the final capping zone.
  3. Control system adopts HMI and servo motors which allow user to easily set the cap vibrating device frequency, swing arm movement procedure and vibrator height to reduce the machine change
Capping Machine:
  1. The Capping Machine is designed for the plastic screw caps.
  2. The Capping Machine adopts a safety device for the oblique and incorrect positioning bottle. For those abnormal statuses, machine will fully stop automatically.
  3. The capping machine is isolated from the liquid filling procedure zone.
  4. Control system adopts HMI and servo motors which allow user to easily set the capping torque and capping system height to reduce the machine change over time for different products.

Specification

Model CJ-570 Automatic Filling/Plugging/Pre-Capping Machine CJC-470 Automatic Capping Machine
Filling Volume 2ml-20ml, 20ml-60ml, 50ml-100ml --
Capacity 80-100 bottles/min
(Based on filling volume and liquid characteristic)
80-100 bottles/min
Power Consumption 220V single phase, 50/60HZ, 3.5KW 220V single phase, 50/60HZ, 1.2KW
Machine Dimensions
(LxWxH)
2975 x 1430 x 2132 (mm) 1600 x 1020 x 2132 (mm)
Machine Weight 1600KGS 450KGS

Video